 The project begins |
 Mar 29 2005, 08:20 AM
Post
#1
|
|
 Post Master  Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182  |
I'm throwing this up so you 1g guys can throw me any hints/tips on things I'm not seeing.
Popping the hood of the VR4 the first thing I noticed is the clutter under the hood. Next I see that the hair filter + box are offset and the intake makes some nasty turns(battery in air filter location like my other galant). I've set myself a list of things to do that are inexpensive and at the same time will make the car better, but I'm up for suggestions on other projects. remove all extra vacuum lines and cap(complete) change all fluids(engine, tranny, Tcase, rear dif) install a K&N and hack airbox change spark plugs(bpr7es) rewire the fuel pump move the battery install SAFC + boost guage hack aircan further and install my old intake with 2g MAF Turn up the boost after a good tune See about changing out the end tank on my old IC to make it fit Install 28x10x3 IC/w 2 1/2" piping get a 3" exhaust and install my EVO manifolds onto a ported turbine housing I'm thinking that list should get me into the 13s for a good start, provided the clutch holds up and the tranny cleans up with some synchromesh. Any suggestions gang? Nathan -------------------- GVR4 866/1000 = the perpetually broken car
|
 |
 
|
Posts in this topic
ncgalant The project begins Mar 29 2005, 08:20 AM
akamiami you're asking for trouble.....but you know tha... Mar 29 2005, 09:45 AM SCCA Stang don't forget to do a boost leak test and possa... Mar 29 2005, 12:55 PM TotalEclipse97 umm money and health insurance
oh
and a cell ph... Mar 29 2005, 04:21 PM ncgalant Trouble is ok when she's not my only car. A b... Mar 29 2005, 06:54 PM SCCA Stang Sounds like a decent find.... obviously she wasn... Mar 29 2005, 07:05 PM ncgalant Just did a compression check. I got about what I ... Mar 29 2005, 09:09 PM 99Spyder I am convinced that you would not know what to do ... Mar 29 2005, 10:04 PM ncgalant I guess I should put my update onto this thread in... Jun 21 2006, 09:14 AM ncgalant Well before I could get torn into it, the oil pump... Jun 24 2006, 09:00 AM awd4kicks Keep at it. Jun 24 2006, 09:16 AM ncgalant Well head #2 is toast. After driving 40 or so mil... Jul 6 2006, 08:13 AM ncgalant I've had enought valve on piston action that I... Jul 6 2006, 10:16 AM AWD DSM 1 Let me know what you find out!!! Jul 6 2006, 10:27 AM 99Spyder Did you at least find the boost leak before this m... Jul 6 2006, 11:36 PM
ncgalant The boost leak was still that split pipe. I got t... Jul 7 2006, 05:50 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 4th December 2025 - 10:12 AM |
Powered By IP.Board
© 2025 IPS, Inc.