Oct 9 2007, 11:22 AM
Post
#1
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 151 Joined: 16-March 04 From: Jacksonville and Champaign IL Member No.: 260 |
Alright well for some reason when I push the clutch in and try to shift into gear it grinds right away. If i push the clutch in and hold it for a second then go to shift it shifts just fine. Please help me out cuz this is my daily driver and I really cant afford to grind gears and ruin my tranny.
Do any of you know why it grinds unless I hold it down? Could it be the slave cylinder itself going bad? Could the master cylinder? -------------------- Hopefully getting back into things w/ a 90 laser rs-t
|
|
|
|
cjk123 Help Oct 9 2007, 11:22 AM
black92_tsi_awd Pull the boot back on the slave, if there's fl... Oct 9 2007, 12:02 PM
cjk123 Is it if there is any fluid at all period? The sla... Oct 9 2007, 12:32 PM
black92_tsi_awd it's probably fine then.
You could try bleedin... Oct 9 2007, 01:49 PM
cjk123 I actually took it out and drove it. It seems to o... Oct 9 2007, 02:10 PM
cjk123 Is there anyone who knows a lot more about these c... Oct 9 2007, 02:15 PM
cjk123 Sorry man, im desperate Oct 9 2007, 02:32 PM
cjk123 Well I guess I'm going to replace the slave cy... Oct 9 2007, 10:31 PM
natedogg You bleed the master cylinder the same way you ble... Oct 10 2007, 08:53 AM
cjk123 Alright, I kind of thought that after I posted but... Oct 10 2007, 11:23 AM
black92_tsi_awd Yep, that's what I did.
Make sure you don... Oct 10 2007, 12:01 PM
cjk123 Alright sounds good, I already got the slave and m... Oct 10 2007, 07:04 PM
cjk123 Alright everything has been done to my tranny and ... Oct 18 2007, 10:31 PM
black92_tsi_awd Dropping the trans is not that hard. I've don... Oct 19 2007, 06:49 AM
cjk123 Okay so today I drained the whole system again, pu... Oct 19 2007, 01:35 PM![]() ![]() |
| Lo-Fi Version | Time is now: 17th November 2026 - 09:25 AM |