 Project ZZZZ, She must run |
  |
 Jul 16 2008, 09:59 AM
Post
#21
|
|
 Post Master  Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182  |
I've got the same problem again. She's leaking oil somewhere around the front case BAD BAD BAD. I'm going to pull the wheel and covers tonight and try to run it longe enough to figure out where its comming from. I have yet to ever see oil when it idles. I was thinking maybe its leaking around the pan, but this is a LOT.
-------------------- GVR4 866/1000 = the perpetually broken car
|
 |
 
|
|
Jul 17 2008, 09:10 PM
Post
#22
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
QUOTE (ncgalant @ Jul 16 2008, 09:59 AM) I've got the same problem again. She's leaking oil somewhere around the front case BAD BAD BAD. I'm going to pull the wheel and covers tonight and try to run it longe enough to figure out where its comming from. I have yet to ever see oil when it idles. I was thinking maybe its leaking around the pan, but this is a LOT. Well I haven't had time to get anything done on the car. Dad's been in the hospital after a minor heart attack  . I figured that was more important  . Its all good though, I'm still hoping to have it running decent by next week. I doubt a drag day is in my future though.
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Jul 17 2008, 09:48 PM
Post
#23
|
|
 Post Master Group: Members Posts: 986 Joined: 7-July 04 From: Central Illinois Member No.: 318 |
Sorry to hear. Gotta take care of Dads. They're one of those limited-time resources as we grow up. Good luck on all fronts!
-------------------- ... she likes bein' forced ...
|
|
|
|
|
Jul 18 2008, 06:36 AM
Post
#24
|
|
 Eats and sleeps DSM jargin. Group: Members Posts: 1,995 Joined: 27-November 04 From: Yates City IL Member No.: 389 |
Damn, sorry to hear that. Hope he gets out of the hospital quick!
-------------------- 92 Eagle Talon TSI AWD "The Black Golfball" How fast can a 14B go???
91 Chevy C1500 "Problem Child" **SOLD** 01 Impala DD 07 Trailblazer Wife's new DD Cars run on blood, sweat, and horsepower... Without the first two, you can't get the last" SOB Racing "Sitting On Blocks" |
|
|
|
|
Jul 18 2008, 06:40 PM
Post
#25
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
well he's back home. He's got 2 stents in his heart, but all's good. I'm going to get up early and try to get the oil leak found tomorrow. Keep him in your prayers over the next weeks if you would. Thanks guys...
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Jul 18 2008, 09:10 PM
Post
#26
|
|
 Post Master Group: Members Posts: 729 Joined: 19-September 02 From: New Baden, IL Member No.: 7 |
It's good he's okay, man. It can definitely screw with you, but it's great he's okay.
Keep on trucking with the car man. Almost there! -------------------- -The original (member) 007. Stop looking at me Spy!!
-98 S-10 P/U creepin' low on stock 15s!! -You come off just a little more intelligent if you know how to spell the insults in addition to saying them |
|
|
|
|
Jul 25 2008, 07:08 PM
Post
#27
|
|
|
Eats and sleeps DSM jargin. Group: Members Posts: 1,995 Joined: 27-November 04 From: Yates City IL Member No.: 389 |
so any update on your dad or the car??
-------------------- 92 Eagle Talon TSI AWD "The Black Golfball" How fast can a 14B go???
91 Chevy C1500 "Problem Child" **SOLD** 01 Impala DD 07 Trailblazer Wife's new DD Cars run on blood, sweat, and horsepower... Without the first two, you can't get the last" SOB Racing "Sitting On Blocks" |
|
|
|
|
Jul 26 2008, 10:54 AM
Post
#28
|
|
 Post Master Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
Good to hear. now i gotta get mine back up and running so we can have a board gathering like said above.
-------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
|
Jul 26 2008, 10:57 AM
Post
#29
|
|
|
Post Master Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
sorry to hear about your dad, hope he gets well soon!!!
One thing to check is the front main seal. I have fought with those a few times and you wont see them leaking unless theres a load on the engine usually. I have my blue talon pullin this crap on me and it took me two or three oil pan gaskets b4 i figured out that it was the front main seal. Very easy to change and prolly not a bad idea to do so since its been sitting so long. -------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
|
Jul 27 2008, 07:46 PM
Post
#30
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
QUOTE (treydawgs4g63T @ Jul 26 2008, 10:57 AM) sorry to hear about your dad, hope he gets well soon!!! One thing to check is the front main seal. I have fought with those a few times and you wont see them leaking unless theres a load on the engine usually. I have my blue talon pullin this crap on me and it took me two or three oil pan gaskets b4 i figured out that it was the front main seal. Very easy to change and prolly not a bad idea to do so since its been sitting so long. good info, I've got the car over to Corey's place(A/C in the garage) I'll tear into her tomorrow again. If it is the front seal I wonder if 20 sec on a 4000 rpm studder would show it. It's a new front case with a brand new seal, but that doesn't mean anything. Well here's hoping..... As for dad, he's home safe and sound. Doc's got him on some meds(which I don't totally agree with). But overall things are good. To send a line up into a heart and put in a stent is really an amazing thing. -------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Jul 28 2008, 08:33 AM
Post
#31
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
QUOTE (ncgalant @ Jul 27 2008, 07:46 PM) QUOTE (treydawgs4g63T @ Jul 26 2008, 10:57 AM) sorry to hear about your dad, hope he gets well soon!!! One thing to check is the front main seal. I have fought with those a few times and you wont see them leaking unless theres a load on the engine usually. I have my blue talon pullin this crap on me and it took me two or three oil pan gaskets b4 i figured out that it was the front main seal. Very easy to change and prolly not a bad idea to do so since its been sitting so long. good info, I've got the car over to Corey's place(A/C in the garage) I'll tear into her tomorrow again. If it is the front seal I wonder if 20 sec on a 4000 rpm studder would show it. It's a new front case with a brand new seal, but that doesn't mean anything. Well here's hoping..... As for dad, he's home safe and sound. Doc's got him on some meds(which I don't totally agree with). But overall things are good. To send a line up into a heart and put in a stent is really an amazing thing. Make sure that crank isn't grooved right where the seal sits on it. Sometimes that rubber seal can actually wear the metal on the snout of the crank and create a groove, thus letting oil by. It's pretty common on higher mileage cranks. -------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Jul 28 2008, 03:05 PM
Post
#32
|
|
 Post Master Group: Members Posts: 774 Joined: 28-October 02 From: Pekin Member No.: 32 |
QUOTE (ncgalant @ Jul 27 2008, 07:46 PM) As for dad, he's home safe and sound. Doc's got him on some meds(which I don't totally agree with). But overall things are good. To send a line up into a heart and put in a stent is really an amazing thing. Installing the stents is what my stepdad does for a living... he's been one of the head cathlab techs at OSF for almost 20 years, amazing technology, although I'm certain it has become far more refined in that time. Hope he does well! -------------------- 2009 Scion Tc
1994 Del Sol Si 1991 Talon TSi AWD 1990 Mustang GT FOR SALE!!! |
|
|
|
|
Aug 6 2008, 08:41 AM
Post
#33
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
Update: She's still running, but I've still got a BAD oil leak. I think its getting worse now. At this point I'm suspecting the cam seals. I got a baseline chip burned and my base timing set, but my knock sensor is bad( CEL for it). Otherwise it runs well and pulls hard for 7psi.
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Aug 14 2008, 09:23 PM
Post
#34
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
Well I think(95% sure) I found my leak. I only found it 10% to late. It seems when I pulled off my oil pump pulley the fire time the seal came out and was wedged way back inside. I've been moving that seal from front case to front case with that seal on the pulley. All of that time, the oil pump wasn't sealing. I happend to pull the pulley off and found the entire back side of it busted into little pieces. Looks like I need a new oil pump seal and pulley. Hopefully that does it case I'm about sick of this. I'm just happy the car is still running half way well.
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Aug 15 2008, 06:19 AM
Post
#35
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
At least you have put the monster leak to bed. Now you can get serious.
-------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places!  |
|
|
|
|
Aug 15 2008, 08:32 AM
Post
#36
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
QUOTE (ncgalant @ Aug 14 2008, 09:23 PM) Well I think(95% sure) I found my leak. I only found it 10% to late. It seems when I pulled off my oil pump pulley the fire time the seal came out and was wedged way back inside. I've been moving that seal from front case to front case with that seal on the pulley. All of that time, the oil pump wasn't sealing. I happend to pull the pulley off and found the entire back side of it busted into little pieces. Looks like I need a new oil pump seal and pulley. Hopefully that does it case I'm about sick of this. I'm just happy the car is still running half way well. Don't get fed up yet, you just found the problem! 
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Aug 15 2008, 09:33 PM
Post
#37
|
|
 Eats and sleeps DSM jargin. Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (ncgalant @ Aug 14 2008, 09:23 PM) Well I think(95% sure) I found my leak. I only found it 10% to late. It seems when I pulled off my oil pump pulley the fire time the seal came out and was wedged way back inside. I've been moving that seal from front case to front case with that seal on the pulley. All of that time, the oil pump wasn't sealing. I happend to pull the pulley off and found the entire back side of it busted into little pieces. Looks like I need a new oil pump seal and pulley. Hopefully that does it case I'm about sick of this. I'm just happy the car is still running half way well. good deal.. glad it all coming together. if you need a hand with it let me know.
-------------------- ┌∩┐(◣_◢)┌∩┐
 |
|
|
|
|
Aug 16 2008, 11:33 AM
Post
#38
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
Before I order one, does anyone have an extra oil pump pulley laying around? Mine's in 50 pieces.
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Sep 9 2008, 04:07 PM
Post
#39
|
|
|
Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
Well the oil leak is officially fixed with the new oil pump sprocket and seal. I think that will be the last thing I get done this year. My plan at this point is to pull the car up into the drive and park it for the winter. I've got to get my house ready for the winter so the car's going to have to wait.
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Sep 9 2008, 04:54 PM
Post
#40
|
|
 DSMCentral Freak Group: Members Posts: 355 Joined: 18-March 08 From: Washington, Illinois Member No.: 2,799 |
Good to hear it's fixed!
You'll have to spread the tuning love sometime. I'm pickin up a car with a socketed EPROM, Burner, and the software. 
-------------------- If the sound of a DSM in the distance rowing through the gears gives you a hardon, you might be a car enthusiast.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 26th January 2026 - 02:55 PM |
Powered By IP.Board
© 2026 IPS, Inc.