Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> initial startup issues
fastclipse82
post Sep 2 2006, 05:25 PM
Post #1


Person of Wisdom
***

Group: Members
Posts: 110
Joined: 5-May 03
From: Granite City, IL
Member No.: 128



welp, I just got my rebuilt motor in my 92 Talon AWD. The harnesses are all connected, IC pipe is ran. Literally everything is done except the damn thing wont start. The car cranks and im getting fuel but im not getting any spark. This may be because im using a 90 CAS that I wired into the 92 harness. However after checking the wiring diagrams I did wire it correctly, Another thing I was thinking is that the only sensor not hooked up is the sensor on the front of the tranny. The one with the ball on the end of it. I believe its a reverse light switch. Could this cause the car not to start? I printed some tests from alldata on how to test the coil pack so im going to do that now but any ideas will help.
Oh, one more thing. I noticed that on the old intake manifold there was a sensor bolted to the brace on the back of it. It has 2 wires coming out of it and has a silver square cap on it. The backside of it is filled with an epoxy material. Do I need this? I searched all over for a harness on my car but I cant find one that matches this one so I dont even know where to plug it in. Thanks alot guys.


--------------------
Drew Taylor; 1992 Eagle Talon TSi AWD user posted image
Go to the top of the page
 
+Quote Post
AWD DSM 1
post Sep 2 2006, 07:46 PM
Post #2


DSM Tech Wizard
*******

Group: Members
Posts: 2,256
Joined: 10-January 01
From: central IL
Member No.: 10



I think the CAS may be the culprit... I belive there are 2 different styles. Or it just may be plain old dead. Doubt the reverse light would keep it from starting, and I think that sensor on the intake manifold is some sort of air temperature sensor, I've seen it missing before.


--------------------
The fastest car I own is a minivan....
Go to the top of the page
 
+Quote Post
fastclipse82
post Sep 3 2006, 11:25 AM
Post #3


Person of Wisdom
***

Group: Members
Posts: 110
Joined: 5-May 03
From: Granite City, IL
Member No.: 128



Well as far as the little sensor, I looked on Ross' 90 and his has it. We unplugged it and it lost the rpm signal but still started. Also, we ruled out the sensor on the tranny. I also put the stock CAS back on and it still wont get any spark. The only other thing to do is to swap out the ignition coil pack with a known good one but the only one I can find is off a 90. Will this work with a 92 ecu? I've heard it wont but I wanted to make sure.


--------------------
Drew Taylor; 1992 Eagle Talon TSi AWD user posted image
Go to the top of the page
 
+Quote Post
turbohcar
post Sep 3 2006, 09:19 PM
Post #4


DSM Tech Wizard
*******

Group: Members
Posts: 2,404
Joined: 16-December 03
From: Fletcher/Bloomington
Member No.: 214



That coil pack should have a different plug-in even if I remember right. Even so, it'll work but the tach won't read right I believe.


--------------------
"I hear he tunes the space shuttle also...and that thing is fast"
Go to the top of the page
 
+Quote Post
Mitsu 77
post Sep 4 2006, 09:49 AM
Post #5


DSMCentral Freak
****

Group: Members
Posts: 259
Joined: 6-February 04
From: Bloomington
Member No.: 233



You may want to try a different ignition transistor. I have had that little gem mess things up for me. I have an extra laying around if you need to borrow it to try that route.


--------------------
Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS


FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 1st May 2026 - 02:10 AM
Design by: IPB Download & eBusiness Discussions