Started ripping the car apart last night and this morning... only took 3 hours to pull the motor. Must be getting good at it.

Let me know if anyone needs ANYTHING. Special deals for DSMCentral members.

driver side B-pillar

hatch weather stripping(if its any good)
driver door stripping both on the door and on the car(if its good)

now this is a weird one.

The rubber hose between the fuel pump and the hard line under the car.

lookin to buy a tranny cheap......

Justin-

Got the b-pillar. Weatherstripping you're welcome to, but I'm not sure it's any better than what you've got. Should have the fuel line also, but I have to make sure that I don't break it taking it off.

$30 for all, picked up.



AWD4me -

I have a 90 tranny. Don't know if you'll need the transfercase also (90's are different from the 91+, if you've got a 90 then you're fine). Tranny has a slight "zip" from 2 to 1, but shifts fine otherwise. $250 as-is, or I can have it rebuilt better than new for an additional $350 ($600 total).

slight "zip"?

and yes i have a 90...

yea... it doesn't really grind, just doesn't smoothly engage all the time. Only seemed to do it about 50% of the time. Probably from a worn syncro.

Every 1st gen DSM ive ever owned has done this. I thought it was because there is no 1st gear synchro?? Who cares about going from 2nd to 1st anyways? $250 is a pretty good deal for a good tranny.

What color is this car Rob?

where do you live AWD DSM? im very interested...

Car is maroon and pretty beat up... doubt you'll find any body parts worth pulling.

AWD4me- I'm in Metamora, about 15 min east of Peoria. Feel free to PM me and we can disucss specifics.

deal. I'll give you a call later today and maybe run out and grab that stuff.

I need the BOV flange. Just the pipe along the intake not the BOV itself. What do you want for it? I can pick up right away.

$10?

hey im looking for a 1990 awd gas tank and fuel pump assembly please call me at 217-691-1848 i am in desperate need of those two parts

thanx for ur time

adam

1g crank needed....

I'll sell you a shortblock with a good crank... not sure I want to tear the motor that far down. Travis might have one also.

Still got the motor, tranny, transfercase, turbo, etc... from the car. Package deals available...

Also still have the extrude honed manifold and EGT along with some other goodies.

PM me for details.

NM.

Aftermarket stuff and Prices -

Greddy Turbo Timer - $60
Polished UICP w/BOV - $100
Extrude honed intake manifold - $275 ($405 from Buschurracing.com)
SS clutch line NEW!- $30
Autometer Phantom EGT w/probe - $100
Shifter Plate Bushings - $25
Shifter cable bushings NEW! - $25
Breather filter NEW! - $10

(2) complete External Oil cooler setups - $100 ea (work on any 6-bolt motor)

Stuff's probably going up on e-bay within a few days...

Do you have the harness for the timer?

Only harness is the one that would have come in the box from the factory with the timer. You can get one for your specific car for about $20 online.

Tranny is sold.

$60 is a deal....

I wish everyone would stop expecting to buy stuff for nothing and sell it for it's weight in gold...

Hey Rob, you dont have an alternator and a water pump do you? The lasers water pump took a leak on the alternator and now the alternator has quit working. HAHA! Typical DSM bitch. We need to get it fixed and sold to make room for the new car.

I can probably hook you up with an alternator, water pump you'd probably better go new on. $10 for the alt?

hey Rob, do you still have the Throttle body?

Yeah. They are only $40 I guess for a new waterpump. I think Kristen and I are going to be in Roanoke to test drive a car so I'll let you know when and I'm sure we can extend our trip to Metamora. Don't hold it or anything though. Thanks Rob!

Mark - NP... not like people are beating my door in for used alternators.

xian - I should have both a 90 and 91-94 style TB. All sensors included, worked when pulled... $50 each.

Rob, you wouldn't happen to have an interior rearview mirror would you?

Nope, not anymore...

how much for the turbo??

Turbo is pending... but I was asking $125

if she falls through let me know

I have a 14B. Its got the customary crack in the turbine housing and the threads for the oil return line need to be retapped, but its only got 40K on it and has been ported out and has an enlarged wastegate flapper.

Oh yeah. It still held 16PSI just great when I took it off of the car and I was hoping to get $100 for it.

Rob,
I see tb's w/all sensors on the trader for $35 all the time. How's $35 cash in hand sunday the 16th, your door?

bump... the 90 tb.

trader hasta compete with shipping prices too. I wouldnt doubt that it would cost more than 15 to ship.

$40 and you've got a deal.

see you on the 16th. Do you want to pm with directions, or is there some place more convenient to meet up at? Time and location basically.
thanks

I'll PM you when I get a few free minutes... weekends been crazy...

Turbo, EGT, and extrude honed intake are sold.

Updated list of major parts still for sale Everything from a 1990 Talon AWD unless otherwise noted-

-(2) 1990 External oil cooler systems - $100 (includes everything needed for installation)
-1991-94 TB with all sensors - $50
-SS clutch line - $30
-Full set of Shifter bushings (shifter plate and cable end) - $30
-6-bolt long block (oil pan to Valve cover) Ran when pulled - $500
-90 22 spline Transfercase - $125
-Radiator - no leaks - $50
-AWD Driver's side equal length half-shaft - $50
-Intercooler - $50
-Eclipse Wheels with ok tires - $125

Also still have shifter, shift cables, lights, some interior trim, etc.... best offer takes it. Open serious offers.

do you have the center fan vent from the centre console since the one at slo pny got lost somewhere.

also, what are the specs on the wheels (aluminum???, bent/not???)

UICP is SOLD...

Ben - I do have a center vent from the parts car.. $5?

Wheels are just stock pinwheel style GSX wheels. None are bent. Tires are fair. One is missing a center cap, but overall they are in good condition. I've got pics if you want to PM me your e-mail...

just leave it with the ramps that I will pick up tomorrow and I will leave the $5 somewhere you can find it, lso if you just want to leave the wheels out by the ramps too, I can just look at them tomorrow... Ben

Ramps are right inside the door, Center vent is on my workbench, and the wheels are sitting on the shelves up front...

one oil cooler unit, turbo timer, taillights, and intercooler are now on e-bay if anyone is interested....

parts

Rob, do you have a coilpack for a 91-94? If so I will see if I can some pick it up tomorrow along with that Alternator? Thanks!

I don't think so, but I'm not for sure... I know that I've got a 90, but that probably doesn't help much.. haha..

I'll be free anytime after 4:30 tomorrow!

Rob

will that throttle body hook right up to my 7 bolt? If so i might take it off ur hands

You'll probably need to to switch to a 1g intake to take full advantage of it (which I also have ), but yes, it would be a direct bolt on.