![]() |
![]() |
![]() ![]()
Post
#1
|
|
![]() Beginner ![]() Group: Members Posts: 40 Joined: 9-January 04 From: Peoria Member No.: 223 ![]() |
I have installed everything, yes it is done correctly b4 you ask. and yes I am competent too. The only signal I have going to the afc is the damn knock signal, during initial set up I was doing the normal set up and I could not get any voltage readings from my TPS? I have a 2G eagle talon TSI AWD I am not sure if my TPS is bad or what any ideas??
|
|
|
![]() |
![]()
Post
#2
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 ![]() |
They also have info on vfaq.com for the same thing. Just a little better detailed.
I would also go over all the wires just to make sure. It is always nice to double check things that you know you did right. That way you know you did do it right. I myself think it is hooked up to the wrong wire. I have done this myself, So I know now to double check everything. -------------------- |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 08:39 PM |