![]() |
![]() |
![]() ![]()
Post
#1
|
|
![]() Beginner ![]() Group: Members Posts: 40 Joined: 9-January 04 From: Peoria Member No.: 223 ![]() |
any people that know what they are talking about would be more than welcome as far as tuning and setting up the SAFC thanks Don L
Ok here is a run down on my hop ups. Car is Dropped 2” KYB GR2 shocks Full set of hard pipe, Greddy Type S Blow Off Valve Full 3” A’pex I Turbo back exhaust B&M Adjustable Fuel pressure regulator B&M fuel pressure gauge. Walbro 255 lph fuel pump Full set of slotted and vented Rotor Full set of Ceramic pads Short throw Shifter Shifter Stabilizer Bushing Turbo XS dual Stage boost controller A’pex I SAFC II still tuning with that one.. Custom Propane Injection (controlled on manifold boost pressure) Removed the air dam in front of the passenger tire and installed a grill mesh My data logger is on its way still and I have never used one so when that gets here I will probably be posting more questions on that topic too. Not on the car or not going to go on. Ceramic coated header it’s a pacesetter but I hope it will last long enough to pay for its self. I have 2 extra T25s and a T28 for another car |
|
|
![]() |
![]()
Post
#2
|
|
![]() DSMCentral Freak ![]() ![]() ![]() ![]() Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 ![]() |
I VERY hightly recomend the AEM UEGO wideband gaudge type controller. It is very accurate and mounts in a standerd 52mm piller. Using a wide band is the only way to tune. Just ask anyone that has one.
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 08:37 PM |