 SAFC II no throtle signal? 95 Talon TSI, anyone got one on a 2G? |
  |
  Apr 13 2006, 01:42 PM
Post
#1
|
|
 Beginner  Group: Members Posts: 40 Joined: 9-January 04 From: Peoria Member No.: 223  |
I have installed everything, yes it is done correctly b4 you ask. and yes I am competent too. The only signal I have going to the afc is the damn knock signal, during initial set up I was doing the normal set up and I could not get any voltage readings from my TPS? I have a 2G eagle talon TSI AWD I am not sure if my TPS is bad or what any ideas??
|
 |
 
|
|
Apr 13 2006, 04:13 PM
Post
#2
|
|
 Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
If you have a haynes or a chiltons, they outline a procedure to check if your TPS is bad. Basically just checking resistances. If you can get a logger on it, you could check it that way too.
|
|
|
|
|
Apr 13 2006, 06:38 PM
Post
#3
|
|
 Eats and sleeps DSM jargin. Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 |
They also have info on vfaq.com for the same thing. Just a little better detailed.
I would also go over all the wires just to make sure. It is always nice to double check things that you know you did right. That way you know you did do it right. I myself think it is hooked up to the wrong wire. I have done this myself, So I know now to double check everything. -------------------- Thanks, Bud!
 |
|
|
|
|
Apr 13 2006, 06:54 PM
Post
#4
|
|
 DSMCentral Freak Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 |
Not trying to knock you or anything, but did you use butt connectors, or soder. The reason I ask is becuase I have had that problem B4 and it was because I didn't soder all of my connetions.
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
|
 Apr 13 2006, 08:25 PM
Post
#5
|
|
|
Beginner Group: Members Posts: 40 Joined: 9-January 04 From: Peoria Member No.: 223 |
Ok thanks everyone but it is done.. ok next question who knows what they are doing as far as tuning this thing lol I have been reading everything I can find on it I have been playing with this and wow I get some major snap neck but it is falling on its face when I let off the gas to either shift or when I give it thtl it stutters then kicks in ? obviously I got allot to learn on this area anyone in the Peoria area willing to help or what ever? thanks guys later.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th October 2025 - 10:55 PM |
Powered By IP.Board
© 2025 IPS, Inc.