 Datalogger problems, wont log |
 May 21 2006, 04:30 AM
Post
#1
|
|
 Info Seeker  Group: Members Posts: 93 Joined: 19-August 05 Member No.: 589  |
Hey guys...
Im running a PalmIII xe (os 3.5) and the mmcd software...I've got a cable with a 3 prong connector hooked up correctly to the 1-10-12 prongs on the diagnostic port... For a while I could log and there were no problems, and then sometime later I just have nothing! I did the SAFC install, and had a few loose connections, but I dono why the logger wouldn't work b/c of it! If I press "Test" as a mmcd function, instead of pulling a code (no CEL) it will come up either as 'Serial Comm error' or 'Ecu comm error'....What is going on? Im using 1.5 software now b/c after I installed 1.8 is when the problem seemed to start, or at least when I first noticed it... Possible Fix: Im strongly considering buying Budmann G's logger cables, which look to be much better quality...I don't know if my problem is the cable tho, altho buying a better cable will at least rule out the possibility...Im looking for any other ideas or advice...My 560cc injectors are waiting to go in, and I need to see if Im knocking with my current safc settings and the fuel pump in...Help me out guys....Thanks a lot for reading -Josh -------------------- -Josh
*ChitownDSM* - '90 Talon Tsi AWD - PTE 50trim, FP Cams, Rebuilt 6 bolt ++ - '91 Talon Tsi AWD - Totalled (1/14/07) 12.79 @ 112.5mph on the stock clutch :) |
 |
 
|
Posts in this topic
Chicago_DSM Datalogger problems May 21 2006, 04:30 AM
natedogg I've had both the logger cable that runs to th... May 21 2006, 10:41 AM
Chicago_DSM Well the serial cable goes to a cradle..So Im hopi... May 21 2006, 04:12 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 7th August 2026 - 10:25 PM |
Powered By IP.Board
© 2026 IPS, Inc.